home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Gold Medal Software 3
/
Gold Medal Software - Volume 3 (Gold Medal) (1994).iso
/
misc
/
st4notes.arj
/
4102.TXT
< prev
next >
Wrap
Text File
|
1994-03-04
|
2KB
|
42 lines
-----------------------------------------------------------------
STACKER NOTE STACKER NOTE
STACKER 4.0 & QEMM 7.0/DOSDATA.SYS
(Applies to Stacker 4.0)
STAC FAX 4102 (02-22-1994)
-----------------------------------------------------------------
BACKGROUND
QEMM version 7.0x includes a device driver called DOSDATA.SYS. If
you have QEMM versions prior to 7.03, you may find that your
computer "hangs" at that line during startup.
SOLUTION
- Modify your CONFIG.SYS to permit the startup process to
proceed.
- Upgrade to QEMM version 7.03.
Modify your CONFIG.SYS to permit the startup process to proceed
When starting your computer with QEMM installed, you may press
the ALT key to boot without installing DOSDATA.SYS. This will
allow you to modify your CONFIG.SYS file.
1. Restart your computer. After the machine "beeps", press and
hold the ALT key. When you receive the on-screen message to
press <ESC> to unload DOSDATA, release the ALT key and press
ESC.
2. At the DOS prompt type ED /C <enter>.
3. Add the following switches to the end of the DOSDATA device
line: /B:2001 /IODATA-. the line should now look like this:
DEVICE=C:\QEMM\DOSDATA.SYS /B:2001 /IODATA-
4. Save the file and restart your computer.
Upgrade to QEMM version 7.03
Contact Quarterdeck to upgrade to version 7.03 of QEMM. You may
then remove the switches from the DOSDATA.SYS line.
-----------------------------------------------------------------
Copyright 1994 Stac Electronics